Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Manhattan Beach
If your chimney is crumbling, leaking, or venting a gas insert through a stack that was never built for it, you’re in the right place. Chimney repair in Manhattan Beach is its own kind of work: salt air off the Strand, marine-layer damp, and a lot of 1940s-60s beach cottages with clay-tile or unlined flues behind the stucco. We’re a chimney specialty company, not a general handyman outfit, and we know this stretch of the South Bay. Call (833) 725-4278. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Manhattan Beach Homeowners Call Chimney Sweep Venice for Chimney Repair
We built our reputation in Manhattan Beach by doing the unglamorous work well: showing up, explaining what we see in plain terms, and not recommending a repair the homeowner can’t verify. Our technicians have up to 13 years of experience, and they’re trained to read a chimney the way a doctor reads a scan – camera first, diagnosis second, recommendation last.
The calls we get here are specific. A homeowner notices mortar joints flaking off the chimney stack after a damp winter. Someone else has moisture in the firebox and a rusted damper, and isn’t sure if it’s the cap, the crown, or the flashing. A third has a gas insert in a rebuilt contemporary and hasn’t had the flue looked at in years. We handle all three with the same approach: a real inspection, documented on video, before anyone talks about a price.
Everything we do – sweep, inspect, cap, crown, fireplace repair, and chimney repair – falls under one specialist company. That means you’re not coordinating a mason, a roofer, and a sweep on a job where all three are actually the same problem. The local pro we connect you with is licensed and insured as their state requires, and we can work with your insurer when a covered loss is involved.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Manhattan Beach
Mortar Repointing
Repointing is the single most common repair we recommend on Manhattan Beach chimneys, because salt-laden marine-layer air attacks the mortar joints before it does much else. A typical repointing job in Manhattan Beach runs $450-$1,200 depending on how much of the stack is affected and whether scaffolding is needed. We grind out the failed joints, refill with fresh mortar matched to the original, and keep the repair to the area that actually needs it.
Spalling Brick Repair
Spalling – brick faces popping, flaking, or falling away – is the second call we get in Manhattan Beach, and it’s almost always a moisture story. The salt air pits the brick surface, water gets in behind it, and the freeze isn’t the culprit here so much as the constant damp and the salt attack. Spalling brick repair in Manhattan Beach typically runs $600-$2,400 depending on how many units need replacement and whether the crown or cap contributing to the problem also needs attention.
Chimney Waterproofing
Waterproofing is the repair that prevents the next one. On a coastal chimney, a breathable waterproof coating on the masonry keeps the marine-layer moisture out while still letting the brick dry from the inside, which is the difference between a repair that lasts and one that traps water and makes things worse. Chimney waterproofing in Manhattan Beach usually runs $350-$900 for a full treatment, and we apply it after the masonry has been repointed or rebuilt, not before.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and on Manhattan Beach homes it’s the first thing salt air eats. A corroded or lifted flashing is why so many “chimney leaks” actually turn out to be a roof-plane leak at the chimney base. Flashing repair in Manhattan Beach runs $300-$850 for a standard residential rerun. If the flashing has been failing a while, we check for rot in the immediate framing before we close it up. For a full review of everything we cover, see our chimney repair service page.
Trusted Brands We Service in Manhattan Beach
We work with an intentional set of professional-trade product lines: DuraFlex for flexible relining, HeatShield for ceramic flue resurfacing, Gelco and Olympia Chimney for liners, caps and crowns, and Famco for caps and related components. We choose these because they’re what the trade uses on real jobs, not what’s on the shelf at the hardware store. We don’t claim to stock parts locally – the right material is sourced for your specific chimney – but we know these lines well enough to specify and install them correctly on Manhattan Beach homes. The right part for a salt-air coastal exposure isn’t always the right part for the Valley.
Common Chimney Repair Problems We See in Manhattan Beach Homes
- Salt-eaten caps and dampers. The marine layer corrodes metal chimney caps and dampers faster here than in drier inland South Bay cities a few miles away, and a rusted-through cap lets water and debris straight into the flue.
- Cracked clay-tile joints in older flues. In 1940s-60s beach cottages, the clay-tile flue liner commonly develops cracked or open joints under moisture cycling, which lets creosote and heat reach the framing around the chimney.
- Unlined flues venting modern appliances. In rebuilt contemporary homes, gas or decorative fireplaces are routinely vented into original masonry stacks that were never sized or lined for those appliances, which produces draft and spillage problems that only a camera inspection reveals.
- Crumbling mortar and spalled brick at the crown and roof line. Because the damage starts on the outside, the first sign is often mortar on the roof or a crumbly chimney crown rather than anything the homeowner sees from the firebox.
Pricing for Chimney Repair in Manhattan Beach, CA
Repair costs in Manhattan Beach sit a touch above the South Bay average, mostly because salt-air damage tends to hit the crown, cap and flashing alongside the masonry, and coastal exposure calls for materials and coatings that can handle it. Typical estimated ranges here:
| Repair | Typical Manhattan Beach Estimate |
|---|---|
| Mortar repointing | $450-$1,200 |
| Spalling brick repair | $600-$2,400 |
| Chimney waterproofing | $350-$900 |
| Flashing repair | $300-$850 |
| Tuckpointing | $500-$1,500 |
| Chimney rebuilding | $3,500-$9,000 |
| HeatShield ceramic flue resurfacing | $1,200-$2,800 |
| Full liner replacement (DuraFlex) | $2,500-$6,000 |
These are estimates, not quotes. The written estimate we give you after inspection is the final price, and we don’t recommend a repair we can’t show you on camera. Nothing is upsold – if the work can safely wait, we’ll tell you that too.
See the difference
Before
After
Before
After
Before
AfterWhy Salt Air Changes Chimney Repair in Manhattan Beach
Here’s the local insight that shapes almost every repair call we get in Manhattan Beach: the dry, hot inland South Bay cities a few miles away deal with one set of chimney problems, and Manhattan Beach deals with another. The marine layer keeps things damp and salty here, and that combination eats exposed chimney caps, dampers and flashing far faster than inland exposure does, while the older beach cottage stock near the water has different deposit and corrosion patterns than the drier inland South Bay. The real complication is when a rebuilt contemporary is sitting on top of an original 1940s-60s masonry stack – the new gas or decorative fireplace is often vented into an unlined or clay-tile flue that was never engineered for it. Many of these fireplaces go uncleaned for years until a draft complaint or a carbon monoxide concern finally prompts a sweep. That’s why, on Manhattan Beach chimney work, the visual inspection at the exterior is often where the real story shows up.
How a Typical Chimney Repair Goes in Manhattan Beach
In a typical Manhattan Beach repointing or relining call, a homeowner notices crumbling mortar joints, or a rusted damper and moisture in the firebox after the marine layer has sat on the coast for a stretch. The inspection often turns up a clay-tile flue with deteriorated joints and salt-eaten flashing at the roof line, sometimes with a gas appliance tied into a stack that was never sized for it. A qualified local pro runs a Level 2 inspection with a camera, documents the spalling brick and any crown cracking on video the homeowner can watch themselves, then repoints or rebuilds the affected masonry, repairs the flashing and the chimney crown, and installs a correctly sized liner and cap suited to a damp, salty coastal exposure. A camera report isn’t paperwork – it’s your protection against being sold a repair you didn’t need.
We Also Serve Cities Near Manhattan Beach
We also take chimney repair calls in Manhattan Beach and the neighboring cities of Inglewood, Lennox, El Segundo, and Westchester. The same coastal exposure that drives salt-air damage in Manhattan Beach pushes inland in a matter of miles, so the diagnosis can shift quickly from one ZIP to the next – which is why we inspect every chimney before we recommend anything.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Manhattan Beach
In most cases, yes: an unlined flue is a fire and carbon monoxide risk and shouldn’t be used for a wood fire until it’s lined or professionally evaluated. The clay-tile or open brick flues in a lot of 1940s-60s Manhattan Beach cottages can crack or break down over years of moisture cycling, and without a proper liner there’s nothing between the heat and creosote and the framing of your home. A camera inspection first will confirm the actual condition and give you footage you can look at yourself before any lining is recommended. Call (833) 725-4278 for a free estimate.
Because Manhattan Beach’s marine-layer salt air corrodes the exposed mortar, brick and metal faster than the drier inland South Bay does. Salt crystals work their way into the mortar joints and cycle with the damp air, gradually breaking the surface down – which is why a chimney that’s fine a few miles inland can be showing real deterioration out here. Once the joints are failing, a repointing resets the clock. Call (833) 725-4278 for a free estimate.
Yes. A gas or decorative insert doesn’t produce the creosote a wood fire does, but it still needs its flue and vent inspected, especially when it’s been tied into an original stack that was never sized for it. The common failure here is a modern gas appliance venting into a 1940s-60s chimney built for an open masonry fireplace, which creates draft and spillage issues that a camera inspection reveals. Skip it long enough and you’re flying blind on a carbon monoxide risk. Call (833) 725-4278 for a free estimate.
Salt air pits and corrodes the metal chimney cap, the damper and the flashing at the roof line well before it affects anything further down. The practical effect is that water and debris get into the flue through a rusted or sealed cap, and a corroded flashing lets moisture in at the chimney-roof joint – which is often misdiagnosed as a chimney leak when it’s really a roof-plane problem. A waterproofing treatment after the repair helps slow the cycle. Call (833) 725-4278 for a free estimate.
You see the evidence yourself – every recommendation comes with camera footage of the flue and photos of the exterior damage, and you watch it before we talk about the repair. That’s the standard we hold on every Manhattan Beach chimney job, because the worst upselling in this trade happens when a homeowner is told they need thousands of dollars of liner or masonry work with no way to verify it. If we tell you a repair can wait, it can wait. Call (833) 725-4278 for a free estimate – the estimate is free and the price is set by the written quote.
Ready to Book Chimney Repair in Manhattan Beach?
A chimney that’s leaking, spalling, or venting an appliance through a stack that was never sized for it doesn’t fix itself. Whether you’ve got a beach cottage with an unlined flue or a rebuilt contemporary with a gas insert nobody’s inspected, we start with a camera inspection and an honest read, and we don’t recommend a repair you can’t see for yourself. Call (833) 725-4278 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The local pro we connect you with is licensed and insured as their state requires.
Written by the team at Chimney Sweep Venice.