Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Beverly Hills
Chimney repair in Beverly Hills usually starts with something small: a water stain on the ceiling, a loose brick near the crown, or mortar that crumbles when you touch it. Our technicians have up to 13 years of experience with exactly these chimneys – the 1920s Spanish Colonial and Tudor stacks north of Sunset and in the Flats, and the newer liners in the rebuilds above the basin. We know how Beverly Hills chimneys age, and we know what the work involves when a stack is old enough to matter. Call (833) 725-4278 for a free estimate.
Why Beverly Hills Homeowners Call Chimney Sweep Venice for Chimney Repair
We work on chimneys as a specialty, not as one line item on a general handyman list. That matters in Beverly Hills, where the housing stock is unusually old and the repair decisions are unusually consequential. A 1920s clay-tile flue and a modern factory-built fireplace need different hands, different materials, and different judgment.
That judgment is what we bring. Our technicians have up to 13 years of experience, and we’ve built a reputation among Beverly Hills homeowners who’ve been told they need thousands of dollars of liner and masonry work and want a second opinion before agreeing. We use professional-trade product lines – Gelco, Olympia Chimney, Famco, Copperfield, DuraFlex, HeatShield – because that’s what the trade uses, not what sits on the shelf at the hardware store. Our inspections are available as a standalone service, so a safety assessment doesn’t come with a sales pitch attached.
We serve Beverly Hills directly, and we know the response expectations that come with a city this size. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Beverly Hills
Mortar Repointing in Beverly Hills
Beverly Hills mortar joints dry out fast under long dry spells, and once they crack, water gets behind the brick and the whole stack starts to loosen. Repointing replaces failed mortar with a mix matched to the original – critical on a hand-troweled stucco surround or a 1920s stack where a too-hard mortar will crack the brick it’s supposed to protect. We grind out the failed joints and pack new mortar in lifts so it cures without shrinking away.
Spalling Brick Repair in Beverly Hills
Spalling is what happens when moisture freezes inside a brick and pushes the face off. In Beverly Hills the classic pattern is a cracked crown letting water in, then Santa Ana wind-driven rain finishing the job. We remove the failed brick, replace it with matching stock, and address the moisture source so the new brick doesn’t fail the same way. Repointing alone won’t fix spalling; the water has to be stopped first.
Chimney Waterproofing in Beverly Hills
A breathable waterproofing treatment on the masonry slows water absorption without trapping moisture inside, which matters when the original brick is already 90+ years old. We don’t waterproof a chimney that’s still leaking through a cracked crown or bad flashing. We fix the source, then treat. That’s the difference between a repair that lasts and one that hides a problem for a season.
Flashing Repair in Beverly Hills
Flashing is the metal where the chimney meets the roof, and it’s the most common source of the water stain a homeowner actually notices. Old flashing pulls away, rusts through, or was never installed correctly. We reset or replace it and seal the joint properly. On a Beverly Hills tile roof, that means working with the roofing material, not against it.
We also handle chimney rebuilding and tuckpointing when the damage runs deeper than a patch. From annual sweep to full chimney repair, one specialist handles the whole job, so you don’t coordinate multiple contractors. See our chimney repair service page for the full scope.
Trusted Brands We Service in Beverly Hills
We work with a deliberate portfolio of professional-trade product lines: DuraFlex flexible liner systems, HeatShield ceramic flue resurfacing, and products from Gelco, Olympia Chimney, Famco, and Copperfield. These are the names the chimney trade actually uses, and we can source them for the repair rather than substituting a generic part from a big-box store. That matters on a Beverly Hills stack where the liner, cap, or crown has to fit an original 1920s flue opening. We don’t claim to stock parts locally; we specify the right product for the job and get it there.
Common Chimney Repair Problems We See in Beverly Hills Homes
Beverly Hills chimneys fail in patterns. The older stock fails one way, and the teardown-rebuilds fail another. Here’s what we see most.
- Dried-out mortar crowns. Long dry spells bake the crown until it cracks, and once it cracks, every Santa Ana rain event pushes water into the masonry. This is the slow failure that turns into spalling brick by the time anyone notices.
- Fragile original clay flue liners. A 1920s glazed clay liner is thin and often already hairline-fractured. An aggressive brush on an old liner can crack tiles that were barely holding together, and heavy creosote glaze can’t be brushed off at all.
- Modern appliances in old flues. When an insert or a modern appliance gets vented into a clay tile designed for a wood fire, the flue runs cooler than it was meant to, and creosote builds up faster. The venting has to match the appliance, not the original stack.
- Historic-designation-sensitive stacks. North of Sunset and in the Flats, original decorative terra-cotta and Batchelder-tile chimneys can trigger city Cultural Heritage review before visible mortar or crown work, so the repair has to read correctly against the original.
The Beverly Hills Chimney Reality: Shared Flues and Historic Stacks
There’s one thing about Beverly Hills chimney work that doesn’t come up in most other cities. On the Flats’ 1920s Spanish Revival homes, chimneys often share party-wall masonry with the neighbor’s fireplace. A smoke test on one house can reveal a shared flue that was never lined. That’s a very Beverly Hills discovery, and it changes the entire repair scope: two fireplaces, one flue, and a code problem that wasn’t visible until someone actually tested it. Not every contractor runs the test. We do, because catching it after a repair is far more expensive than catching it before.
The other local reality is designation. North of Sunset and in the Flats, the original terra-cotta and Batchelder-tile chimney stacks are now historic-designation-sensitive. Visible mortar or crown work on those stacks can require city Cultural Heritage review that a flat-basin chimney job never faces. We plan the repair around what can be documented and approved, not around what’s fastest to install. If a recommendation carries a review requirement, you’ll hear it before the work starts, not after.
See the difference
Before
After
Before
After
Before
AfterThe 90210 Hills: Spark Screens and Ember-Sensitive Repair
The fire-prone Santa Monica Mountains edge above the basin, the 90210 hills, is a different job from the Flats. WUI ember-arrestor and spark-screen compliance gets taken far more seriously up there than in the flat basin, and for good reason. A broken spark arrestor isn’t cosmetic in a wildfire corridor; it’s a missing barrier. When we repair a chimney crown or cap in the hills, we check that the screen and ember arrestor are in place and intact as part of the repair, not as an add-on afterwards.
How a Typical Beverly Hills Chimney Repair Goes
In the older Spanish Colonial and Tudor homes, the call usually starts as a water stain. Ninety-plus years of sun-baked, hand-troweled stucco and a dried chimney crown have let moisture into the masonry, and spalling brick plus crumbling mortar joints follow. It gets worse where an insert or a modern appliance was vented into a clay-tile flue never designed for it.
What a qualified local pro does next is run a Level 2 inspection with a camera, checking the firebox, the damper, the smoke chamber, and the flashing. Then the repair: repoint the joints or rebuild the crown with materials that read correctly against a possibly historic stack. Every recommendation gets documented with footage the homeowner reviews before approving any work. That’s the order of operations, and it’s non-negotiable when the chimney might be under Cultural Heritage review or hiding a shared flue.
Pricing for Chimney Repair in Beverly Hills, CA
Beverly Hills pricing runs higher than the flat basin because the work is more careful and the materials have to match original stock. Here’s what the common repairs typically run:
- Mortar repointing: a typical repointing job in Beverly Hills runs $600 – $2,400 depending on how much joint area needs work.
- Chimney crown rebuild: a typical crown rebuild runs $500 – $1,500, more where historic-match mortar is required.
- Spalling brick repair: spot brick replacement typically runs $400 – $1,200 for moderate damage.
- Chimney waterproofing: a typical breathable waterproofing treatment runs $350 – $850.
- Flashing repair: resetting or replacing flashing typically runs $350 – $900.
- Chimney rebuilding: a partial or full rebuild, when the stack has failed structurally, typically runs $4,000 – $12,000 or more depending on height, access, and historic-review requirements.
These are estimates for the Beverly Hills market. The written estimate sets the final price, and the estimate is free. Nothing is recommended without camera evidence you can review yourself. Call (833) 725-4278 for an exact quote.
We Also Serve Cities Near Beverly Hills
From our work across Beverly Hills we also reach the surrounding neighborhoods: Westwood, Culver City, Brentwood, and Mar Vista. The housing stock shifts as you move west, but the diagnosis-first approach carries over – camera inspection, visible evidence, written estimate before any work begins. Call (833) 725-4278 to book a visit.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Beverly Hills
You know by running a smoke test, which shows where smoke travels when one fireplace is fired while the other is cold. If smoke reaches the neighbor’s firebox, the two appliances are on a shared flue. That changes the repair scope entirely, because a shared, never-lined flue usually needs evaluation for relining or separate venting. We run the test as part of a Level 2 inspection. Call (833) 725-4278 to book one.
Yes, if the stack is historic-designation-sensitive, visible mortar or crown work can require city Cultural Heritage review. The tile and terra-cotta details on the 1920s stacks north of Sunset and in the Flats are exactly the elements the designation protects. We plan the repair around what will pass review and document what we find so the homeowner understands the requirement before work starts. Call (833) 725-4278 for an inspection and a written scope.
An old clay liner cracks during cleaning when it’s already hairline-fractured and the brush is too aggressive or too stiff for 1920s tile. The cleaning exposes a weakness that was already there. That’s why we inspect first and sweep second, and why heavy glazed creosote on an aged liner needs a different approach than a standard brush. Call (833) 725-4278 to schedule an inspection before the next sweep.
Yes, homes in the fire-prone Santa Monica Mountains edge, the 90210 hills, need a compliant spark arrestor and ember screen because the WUI standard is enforced far more strictly there than in the flat basin. A missing or damaged screen is a code issue, not a cosmetic one. When we repair a cap or crown in the hills, we verify the screen and arrestor as part of the repair. Call (833) 725-4278 for a free estimate.
Repointing is the right fix when the damage is in the mortar joints and the brick face is intact. If the brick itself is spalling, or the crown has failed enough to let water into the core, a crown rebuild or a larger rebuild is usually the honest answer. That call gets made from camera footage, not from a glance at the roofline. Call (833) 725-4278 and we’ll show you what’s actually there before recommending anything.
Chimney repair in Beverly Hills isn’t a general handyman job. The stacks here are old, the details are protected, and the repair decisions carry real consequences for the household. We bring the camera, the product lines, and the plain explanation. Call (833) 725-4278 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Venice.