Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Beverly Hills
If your fireplace has sat cold since February, or you’ve been handed a repair estimate you don’t fully understand, you’re in the right place. Chimney Sweep Venice works throughout Beverly Hills, from the Spanish Colonial Revival homes in the Flats to the hillside houses along the Santa Monica Mountains edge, and we know how differently a chimney behaves here than it does in the flat basin. That local knowledge matters when your flue is original clay tile, your crown is ninety-odd years old, and a contractor is telling you that you need a whole new liner.
Give us a call at (833) 725-4278. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Beverly Hills Homeowners Call Chimney Sweep Venice for Chimney Sweep
Beverly Hills is a city of older chimneys. Most of the housing stock dates to the 1920s through the 1950s, with hand-troweled stucco surrounds, ornate masonry stacks, and original clay-tile flues that have taken ninety-plus years of creosote and weather. Our technicians have up to 13 years of experience, and a good share of that has been spent on exactly this kind of legacy construction, where the flue is fragile and the stakes for getting it wrong are real.
We also work the newer side of town, where large teardown-rebuilds sit next to the originals. Those newer homes often add factory-built fireplaces and stainless liners alongside the legacy masonry. Both types need a sweep who understands the difference, because the brush and the pressure you use on modern steel are wrong for glazed Victorian-era clay.
This is a dedicated chimney company, not a general contractor sweeping chimneys on the side. From annual sweep to full chimney repair, you deal with one specialist who knows what a Level 2 inspection camera is looking for and what a properly rebuilt crown should look like. We serve Beverly Hills and the neighborhoods around it, and we’ll tell you plainly when work can wait.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Beverly Hills
Level 1 Inspection
A Level 1 inspection is the annual check that keeps a fireplace safe to use and spots small problems before they turn into big ones. In Beverly Hills we look closely at the visible parts of the flue, the firebox, the damper, and the chimney cap and crown. It’s a good fit for a chimney with no known issues and no recent changes to the appliance. If you’ve just moved into a home on a street off Sunset or in the Flats, start here.

Level 2 Inspection
A Level 2 inspection adds a video camera run through the flue, and in Beverly Hills that camera does the most important work on the whole visit. It lets us see cracks, gaps, and spalling in original clay liners that you can’t see from the hearth, and it’s the only honest way to know whether a liner really needs replacing or just needs a sweep. Nothing gets recommended here without camera footage you can review yourself.

Creosote Removal
The warm, dry Mediterranean climate means Beverly Hills fireplaces run intermittently in winter, but they run hard when Santa Ana winds knock out the power and a wood fire is the only heat. Slow, smoldering fires in that pattern build creosote quickly, and it can glaze into a hard third-degree deposit that sits on the flue like a shell. We remove it with soft brushes or rotary tools matched to glazed clay, never with something that will scar a fragile liner.

Soot Removal
Soot coats the firebox and smoke chamber from those same smoldering fires, and it’s the dusty layer that leaves a smell in the room come summer. We clean the firebox and smoke chamber as part of a full sweep so the fireplace comes back to clean masonry. It’s a small step that makes a real difference in how the whole house smells after a long closed-up season.
Trusted Brands We Service in Beverly Hills
We work with a focused set of professional-trade product lines because that’s what the trade actually uses, not what sits on the shelf at the hardware store. When a repair calls for a flexible liner, we use DuraFlex systems; when a flue can be restored instead of replaced, we’re qualified for HeatShield ceramic resurfacing. For caps, dampers, and the metal parts of the chimney we work with Olympia Chimney and Copperfield. We don’t claim to keep parts on the truck, and we won’t tell you we do. What we can do is source the right component for an older Beverly Hills chimney quickly, which is often the harder half of the job.
Common Chimney Sweep Problems We See in Beverly Hills Homes
- Unlined shared party-wall flues. In the Flats, 1920s Spanish Revival homes often share masonry with a neighbor’s fireplace, and a smoke test on one house can reveal a shared flue that was never lined. That’s a construction quirk that shows up rarely outside these historic blocks, and it’s the kind of thing a sweep has to catch before anyone recommends a liner.
- Spalling mortar crowns and dried-out tiles. Long, dry summers pull moisture out of mortar and clay, and the cracks that open up become an ember-entry point when the next wildfire-season wind pushes through. Missing or rusted spark arrestors make it worse.
- Third-degree creosote on glazed clay. A short heating season with intense cold-snap use is a recipe for hard, glazed creosote. It bonds to fragile clay liners and has to be removed carefully, not chipped off.
- Appliances vented into stacks never designed for them. A modern gas fireplace or insert added to a legacy chimney can vent into a flue sized for wood. The draft suffers and the flue takes on a different load, so the right fix is usually in the inspection, not a new appliance.
The Beverly Hills Chimney You Can’t See From the Hearth
Here’s the thing about Beverly Hills that generic chimney advice misses: the Flats and the historic districts north of Sunset are full of 1920s Spanish Colonial Revival and Tudor homes, and a lot of them share party-wall masonry with the neighbor’s fireplace. A smoke test in one house can reveal a shared, unlined flue. That’s a rare construction detail outside this city, and it changes how a sweep approaches the job. It also explains why an inspection here has to look beyond the firebox in front of you.
Add the Santa Monica Mountains edge of the 90210 hills, where the wildland-urban interface means ember-arrestor and spark-screen compliance is taken far more seriously than in the flat basin below. In those homes the chimney cap isn’t a decorative detail, it’s the first line of defense against embers drawn into the flue during a wind event.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Beverly Hills, CA
Pricing on a Beverly Hills chimney is per job, and the written estimate sets the final number. As a guide, a typical annual sweep with a Level 1 inspection in Beverly Hills runs about $180 to $340, and a Level 2 inspection with camera documentation typically runs $250 to $500. Creosote and soot removal that goes beyond a standard sweep usually lands in the $200 to $450 range, and cap or crown repair is quoted separately once we’ve seen what’s actually there. Fragile clay liners and shared party-wall stacks can add time, and that shows up in the estimate, not in a surprise on the invoice. The estimate is free.
We Also Serve Cities Near Beverly Hills
Our work reaches the neighborhoods around Beverly Hills too, including Westwood, Culver City, Brentwood, and Mar Vista. The same older-housing challenges follow the line east and south, and the same camera-first approach applies. If you’re just outside Beverly Hills, call and we’ll book a sweep. Our chimney sweep team handles the whole span from annual inspection to full repair.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Beverly Hills
Yes, stiff brushes and harsh chemicals can scar fragile glazed clay liners, so a standard sweep is exactly what you don’t want on an original 1920s tile flue. We use soft brushes or rotary tools matched to the liner, and we document the condition with a camera first so we know how careful to be. Call (833) 725-4278 for an exact quote. Estimates are free.
A smoke test is the usual way to find out, because a shared party-wall flue in the Flats or north of Sunset can show cross-ventilation between two homes that no one realizes are connected. The camera and the smoke test together reveal it before any repair is proposed. Call (833) 725-4278 to book an inspection.
It may, depending on the designation, since visible work on a historic chimney can fall under Cultural Heritage review in Beverly Hills. We’ll flag that on the inspection report so you know what to check with the city before work starts. Call (833) 725-4278 and we’ll walk you through what a repair involves.
Beverly Hills has a short but intense heating season, so fires tend to burn hot and fast during cold snaps and power outages, then smolder, and that pattern builds hard glazed creosote. Colder climates with steady, well-drafted fires often build less of it. Call (833) 725-4278 for an inspection that confirms what’s actually in your flue.
In the WUI edge of the 90210 hills, a spark screen or ember arrestor is the key component, since it stops embers drawn into the flue during a Santa Ana wind event. We source caps from Olympia Chimney and Copperfield and fit them to your actual chimney. Call (833) 725-4278 for a free estimate on the right cap for your stack.
Book Your Beverly Hills Chimney Sweep
The honest first step is to see what’s actually there. A sweep in Beverly Hills should start with a camera and end with a written report you can read, not a sales pitch for a liner you may not need. We work with professional-grade materials, we can restore a flue with HeatShield ceramic resurfacing instead of selling a full replacement, and we’ll tell you when a repair can wait. Call (833) 725-4278 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Venice.