Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Pacific Palisades
If your chimney is showing crumbling mortar, a chalky white bloom on the brick, or smoke that backs into the room on a cool evening, the repair usually starts with a camera inspection, not a sales pitch. Chimney Sweep Venice handles chimney repair across Pacific Palisades, from mortar repointing and waterproofing to flashing repair and partial rebuilds on the mid-century ranch and hillside homes that line the canyons here. We know how these houses are built and how the canyon weather treats them. Call (833) 725-4278 to book an inspection.
Why Pacific Palisades Homeowners Call Chimney Sweep Venice for Chimney Repair
We’re a dedicated chimney specialist, not a general contractor who sweeps on the side. That matters in Pacific Palisades, where the repair calls tend to involve real masonry judgment: clay-tile flues that have cracked through decades of thermal cycling, crowns that failed years ago, and appliances vented into stacks that were never sized for them.
We work with professional-trade product lines including HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so the materials we recommend are the ones the trade actually uses, not what’s on the shelf at a hardware store. HeatShield ceramic resurfacing is one example: it can restore a flue without the cost of a full liner replacement, and we’re qualified to apply it. Our technicians have up to 13 years of experience.
Nothing gets recommended here without camera evidence you can see for yourself. If a repair can safely wait, we’ll tell you that too. When you reach out, we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Pacific Palisades
From annual sweep to full chimney repair, one specialist handles the whole job. That means you’re not coordinating a mason, a roofer, and a sweep for a single chimney problem. Here’s what we do most often in Pacific Palisades.
Mortar Repointing
Older brick chimneys in Pacific Palisades lose mortar joints slowly, then all at once. Coastal moisture works into the joints, the mortar softens and falls away, and the brick above starts to sit loose. Repointing means grinding out the failed mortar and packing new material into the joint, so the chimney holds together instead of shedding brick.
Spalling Brick Repair
Spalling is what happens when water gets into the brick itself and pushes the face off from the inside. On the mid-century ranch homes around the Alphabet Streets, you’ll sometimes find brick faces flaking off near the crown or around the flashing. We replace the damaged units and correct the water path that caused the problem, rather than just patching the surface.
Chimney Waterproofing
A breathable waterproofing sealant on the exterior masonry keeps driven rain out while letting moisture inside escape. It’s the step that stops spalling from coming back after a repair. On hillside homes off Palisades Drive, where wind-driven rain hits the chimney at an angle, this treatment does a lot of quiet work.
Flashing Repair
Flashing is where the chimney meets the roof, and it’s where most water problems start. Failed or improperly lapped flashing lets water run down into the attic and the masonry chase. We reset or replace the flashing so the roof-to-chimney joint sheds water the way it should. For more on how we approach structural work, see our chimney repair services.
Trusted Brands We Service in Pacific Palisades
We’re stocked and proficient with six recognized chimney-industry product lines: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That range lets us match the repair to the flue instead of forcing one product onto every chimney. A DuraFlex liner system makes sense for one aging flue; HeatShield ceramic resurfacing is often the better call for another. We don’t claim to stock parts locally, but we keep turnaround quick and the recommendation honest. When a brand you already own needs service, tell us and we’ll work with it.
Common Chimney Repair Problems We See in Pacific Palisades Homes
- Cracked clay-tile flues in older ranch homes. Original clay liners in Pacific Palisades’ mid-century houses crack and spall after decades of heating and cooling, and creosote can seep into those cracks into the surrounding masonry. That’s a hidden fire risk you can’t see from the firebox.
- Clogged spark arrestors on canyon and bluff homes. Pacific Palisades is a canyon-and-bluff community, and many chimneys sit in tight masonry chases with capped spark arrestors that fill with leaf litter from the eucalyptus and oak around them. Restricted draft means smoke backing into the room instead of going up.
- Misvented appliances tied into undersized flues. Older furnaces and water heaters in these homes sometimes vent into flues that were never designed for them, which leads to condensation, mortar decay, and dangerous backdrafting. In a brush-covered canyon community, fire-resistant venting matters even more.
- Crowns and flashing that failed years ago. A failed crown or flashing lets water into the masonry, and the damage builds quietly until a chalky white stain shows up on the exterior brick. By then the repair usually involves repointing as well as the crown itself.
What a Typical Repair Looks Like Here
A homeowner often notices crumbling mortar joints or a white, chalky stain on the chimney’s exterior brick. That’s spalling from years of coastal moisture and deferred maintenance. The usual cause is a failed chimney crown or flashing that lets water into the masonry, where it expands and moves the brick on cool coastal evenings. A qualified local pro typically starts with a Level 2 inspection, documents the flue liner and smoke chamber with a camera, then recommends repointing or rebuilding only the visibly deteriorated sections, followed by a waterproofing sealant to keep the problem from coming back.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Pacific Palisades, CA
Chimney repair in Pacific Palisades is priced per job by a written estimate, and the estimate is free. As a general guide for this market, a typical mortar repointing job runs $450 – $1,200 depending on how many joints and how high the work sits. Chimney waterproofing runs $250 – $600. Flashing repair runs $300 – $750. A partial chimney rebuild, where a section above the roofline comes down and goes back up, runs $2,500 – $7,000. HeatShield ceramic resurfacing often lands well under a full liner replacement, which is a big part of why we offer it. The written estimate sets the final price, and nothing is recommended without camera evidence you can review first.
We Also Serve Cities Near Pacific Palisades
We work throughout the westside, including Santa Monica, Brentwood, Westwood, and Venice. If you’re not sure whether your address falls in our coverage, call and we’ll tell you straight. You can also read more about the areas we serve in Pacific Palisades and the neighborhoods around it.
Serving Pacific Palisades, CA – Our Local Coverage Area
We serve Pacific Palisades and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Pacific Palisades
The camera and the joints tell us. If the damage is limited to the mortar between sound bricks, repointing is usually enough; if bricks are loose, dished, or the section above the roofline has lost structural integrity, a partial rebuild is the safer answer. We show you the evidence before anything is recommended. Call (833) 725-4278 for a free estimate.
White, chalky stains usually point to water moving through the masonry and leaving mineral deposits behind as it dries. The cause is typically a failed crown or flashing letting water in. The fix is to correct the water path and seal the masonry afterward. Call (833) 725-4278 to get it inspected.
Frequent clogging is normal on hillside lots with eucalyptus and oak nearby, because leaf litter and ash collect in the cap screen. The practical fix is a cap design that’s easier to clear and sized properly for the flue, checked at each sweep. We can look at yours and tell you what’s happening. Call (833) 725-4278 for a free estimate.
Yes, and the two shouldn’t be treated the same way. Factory-built metal chimneys, common in the newer construction around Pacific Palisades, use manufacturer-specific components and clearances, so the repair has to match the system. Masonry chimneys allow repointing and resurfacing options like HeatShield. We work with both, and we can look at yours and tell you what’s happening. Call (833) 725-4278.
A Level 2 inspection includes a camera look at the flue liner, smoke chamber, and venting connections, and it’s the standard for older homes, homes with recent appliance changes, or after any chimney event. In Pacific Palisades’ mid-century houses, it’s often the only way to see a cracked clay liner or an appliance vented into the wrong flue. Call (833) 725-4278 for a free estimate.
Book Chimney Repair in Pacific Palisades
Whether it’s a joint that needs repointing, a crown that’s failed, or a recommendation you don’t fully understand yet, we’ll show you the evidence and explain the options in plain terms. Call (833) 725-4278 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Venice.