Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Beverly Hills
If your Beverly Hills chimney needs a new cap, a crown repair, or a coating to seal hairline cracks, the first step is knowing exactly what condition the top of the stack is in. We work on the older masonry chimneys that define this city, from the Spanish Colonial Revival homes north of Sunset to the Tudor and Mediterranean houses across the Flats, and we bring the camera so you see what we see before anyone recommends a repair. Our technicians have up to 13 years of experience with clay-tile flues, hand-troweled stucco crowns, and the decorative terra-cotta tops that make Beverly Hills chimney work different from the flat basin. Call (833) 725-4278 to book a sweep and get a free estimate. We answer 24/7.
Why Beverly Hills Homeowners Call Chimney Sweep Venice for Chimney Cap & Crown
Chimney cap and crown work in Beverly Hills is not a generic job. Many of the chimneys here were built in the 1920s and 1930s, and the repair approach has to respect fragile glazed clay liners, original mortar crowns, and in some cases a historic designation that governs what can visibly change. We’re a dedicated chimney specialist, not a general contractor who sweeps on the side, and that focus shows in how we scope cap and crown work on older masonry.
We work with professional-trade product lines rather than whatever sits on a hardware-store shelf: HeatShield for ceramic flue and crown resurfacing, Gelco and Olympia Chimney for caps and components, Famco for venting. When a crown can be sealed and coated instead of demolished, we tell you so. When it genuinely needs replacement, we show the footage that proves it. Nothing gets recommended without camera evidence you can review yourself.
Beverly Hills calls come to us from the Flats, from the hills edge where wildfire precautions are taken seriously, and from the blocks around the Beverly Hills Civic Center and Beverly Gardens Park. We know the drive and the housing stock. Call (833) 725-4278 and we’ll book a visit. Fast dispatch from 7am to 7pm, Sunday through Friday, and the phone line is answered around the clock.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Beverly Hills
Below are the four cap and crown services Beverly Hills homeowners ask for most. Each starts with a look at the whole chimney top, because a cap problem is often a crown problem underneath it.
Cap Installation in Beverly Hills
A properly fitted cap keeps rain, birds, and debris out of the flue and, on a wood-burning chimney, adds the spark screen that older Beverly Hills stacks often went without. On the Spanish Revival and Tudor homes north of Sunset, we fit caps that work with the existing masonry without drilling into fragile glazed clay. For hillside homes near the Santa Monica Mountains edge, we specify ember-arrestor screens because that’s where wildfire-season risk is treated seriously.

Cap Replacement in Beverly Hills
Many caps on Beverly Hills chimneys were installed decades ago and have rusted through, come loose in a Santa Ana wind, or never matched the flue size in the first place. A replacement starts with measuring the actual flue opening, not guessing from the roofline. If the old cap damaged the crown when it failed, we deal with both in one visit so water isn’t getting in between appointments.

Crown Repair in Beverly Hills
The crown is the concrete or mortar cap at the very top of the chimney, and on hand-troweled stucco crowns from the 1920s and 1930s it’s the first thing to fail after long dry spells. We repair crowns with a flexible, crack-bridging approach rather than a brittle patching that reopens in a season. Where a crown is too far gone, we rebuild it to shed water away from the flue. See our chimney cap & crown service for the full scope.

Crown Coating in Beverly Hills
A crown coating seals hairline cracks before they become water intrusion, which matters on masonry that’s seen 90-plus years of thermal cycling. We use HeatShield ceramic resurfacing where the crown is sound enough to coat, protecting the mortar without the cost of a full rebuild. This is a repair pathway, not a cosmetic add-on.
Trusted Brands We Service in Beverly Hills
We work with a deliberate set of industry-grade product lines: HeatShield for ceramic resurfacing, Gelco and Olympia Chimney for caps and crown components, and Famco for venting. These are the brands the chimney trade actually uses, and we’re proficient with them because the materials on an older Beverly Hills chimney have to survive dry summers and intense winter use. We don’t claim to stock parts locally or run a warehouse; we source the right component for your flue and get it fitted without a runaround. From annual sweep to full chimney repair, one specialist handles the whole job.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Beverly Hills Homes
- Cracked and spalling clay-tile flue liners. Original clay liners in 1920s and 1930s Beverly Hills homes crack after decades of creosote exposure and thermal cycling, which hurts draft and can let carbon monoxide escape into the house. A camera inspection shows whether the liner is sound before any cap goes on top of it.
- Hairline cracks in hand-troweled stucco crowns. Long dry spells open small cracks that let water into the chimney, rusting the damper and deteriorating the firebox below. Coating the crown early is far cheaper than rebuilding it later.
- Missing spark arrestors on historic-designation-sensitive stacks. Many chimneys in the Flats and north of Sunset were built without modern spark screens, and during Santa Ana wind events that’s an ember-entry risk. Adding a compliant screen protects the roof and satisfies fire-safety expectations in the hills.
- Shared party-wall flues that were never lined. In the Flats, some 1920s Spanish Revival chimneys share masonry with the neighbor’s fireplace, and a smoke test can reveal a shared flue no one knew about. That’s a condition you rarely find in nearby cities, and it changes how a cap or crown job gets scoped.
Pricing for Chimney Cap & Crown in Beverly Hills, CA
Cap and crown work in Beverly Hills runs higher than in the flat basin because the housing stock is older, the masonry is often decorative, and some repairs need to account for historic-designation review. Here’s what typical jobs run:
| Service | Typical Beverly Hills Range |
|---|---|
| Standard cap installation (single flue) | $350 – $650 |
| Custom or multi-flue cap | $650 – $1,400 |
| Crown coating (HeatShield or similar) | $450 – $900 |
| Crown repair | $600 – $1,200 |
| Crown rebuild | $1,200 – $2,800 |
What moves the number: flue count, cap material, whether the crown can be coated or has to be rebuilt, and whether a Cultural Heritage review applies to visible changes on a designated property. The estimate is free and the written estimate sets the final price. Call (833) 725-4278 for an exact quote.
We Also Serve Cities Near Beverly Hills
We serve Beverly Hills and the surrounding westside, including Westwood, Culver City, Brentwood, and Mar Vista, plus our home base in Venice. If you’re outside the city line and wondering whether the same cap and crown approach applies, it usually does, with adjustments for the local housing. See our Beverly Hills page for the full local picture, or call us to check your address.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Beverly Hills
Yes, in most cases. We fit a spark arrestor that mounts to the flue opening or the cap structure without drilling into the original terra-cotta, because those glazed tops are fragile and often protected by historic designation. If the top is already cracked or loose, we address that first so the arrestor has something solid to attach to. Call (833) 725-4278 to book an inspection and see the options.
A smoke test is the reliable way to find out. In the Flats, some 1920s Spanish Revival chimneys share party-wall masonry with the neighbor’s fireplace, and a smoke test reveals whether smoke is crossing into a flue that was never lined. We run the test as part of the inspection and show you the result. Call (833) 725-4278 to schedule one.
Hairline cracks that haven’t separated the crown, or a surface that’s rough but still structurally sound, usually point to repair or coating. A crown that’s crumbled, pulling away from the flue, or letting water pool is a rebuild. The camera footage settles it. Call (833) 725-4278 for a free estimate and we’ll show you what we find.
Ember-arrestor screens are strongly expected in the hills edge near the Santa Monica Mountains, where wildfire precautions are taken far more seriously than in the flat basin. A spark screen keeps embers out of the flue during Santa Ana wind events. We’ll tell you what your specific stack needs. Call (833) 725-4278.
Yes, and it should. Third-degree creosote is a fire hazard, so the flue gets swept before any cap goes on, not after. Capping a dirty flue doesn’t fix the hazard underneath. Call (833) 725-4278 and we’ll book the sweep and the cap together.
From annual sweep to full chimney repair, one specialist handles the whole job. Call (833) 725-4278 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Venice.