Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Pacific Palisades
If your fireplace has started smoking back into the room, or you can’t remember the last time the flue was opened up and looked at, we can help. Chimney Sweep Venice works across Pacific Palisades, from the Alphabet Streets down to the canyon-side homes off Palisades Drive, and we know what coastal chimneys here are up against. Salt air off the Pacific, eucalyptus litter, and long stretches of light decorative burning all leave their mark inside a flue. Call (833) 725-4278 and we’ll book a sweep. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Pacific Palisades Homeowners Call Chimney Sweep Venice for Chimney Sweep
We’re a dedicated chimney specialist, not a general contractor sweeping flues on the side, and that focus is why Pacific Palisades homeowners keep our number. Our technicians have up to 13 years of experience, and they spend their days on the same equipment the trade uses: DuraFlex liner systems, HeatShield resurfacing, and components from Gelco, Olympia Chimney, Famco, and Copperfield. When we look at the cap on a hillside home, it’s with a specialist’s eye for corrosion and ember-screen condition, not a quick visual from the driveway.
Response into Pacific Palisades is straightforward. The canyon roads and the tight turns above Pacific Coast Highway slow any contractor down, so we plan the route before we book the job. That means an honest arrival window instead of a promise we can’t keep. And the inspection itself is a standalone service. You can book a Level 1 or Level 2 inspection without buying a single repair first, and you’ll get a plain-language report on what we found, with photos of anything that matters. If you’ve been handed a repair recommendation you don’t fully understand, bring it to us.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Pacific Palisades
The fog line and the salt air along the coast put specific wear on Pacific Palisades chimneys, and the work we do here reflects that. These are the services that come up most often.
Level 1 Inspection in Pacific Palisades
A Level 1 inspection is a visual check of the readily accessible parts of your chimney: the firebox, damper, flue, and the exterior cap and crown. It’s the right call for an annual maintenance visit when nothing has changed and you’re burning normally. On Pacific Palisades homes that burn only a few decorative fires a year, a Level 1 gives you a clear picture of creosote buildup and cap condition before small issues turn into expensive ones.

Level 2 Inspection in Pacific Palisades
A Level 2 inspection goes further, with a camera run through the flue to look at the liner’s interior and any hidden sections. This is what we recommend for the original clay-tile flues in 1960s-70s hillside houses here, where the liner can crack and spall while the fireplace is used only lightly. It’s also standard before a sale or after a chimney fire. You’ll see the footage yourself, so nothing is recommended on our word alone.

Creosote Removal in Pacific Palisades
Pacific Palisades chimneys see light but steady use, so creosote builds slowly and often goes unnoticed for seasons. That slow buildup still reaches the glazed, tar-like stage if a flue is deferred long enough. We remove first- and second-degree creosote with the proper brushes and scrapers, and if a flue has heavy glazed deposits, we’ll tell you what it takes to clear them safely.

Soot Removal in Pacific Palisades
Soot settles in the smoke chamber and firebox, and on canyon-side homes it mixes with eucalyptus leaf litter and ash that collect around a capped arrestor. Clearing the soot is part of a proper sweep and part of keeping your draft strong. We clear the firebox and chamber, then check the ember screen while we’re in there, because that screen is the part that actually matters for fire safety on this side of town.
Trusted Brands We Service in Pacific Palisades
We work with a deliberate set of professional-trade brands: DuraFlex flexible liner systems, HeatShield ceramic resurfacing, and Gelco, Olympia Chimney, Famco, and Copperfield components. We don’t stock parts on a truck or carry a warehouse of generic hardware. Instead, we specify the right component for your chimney and bring the trade-grade part for the job. That matters on Pacific Palisades homes where a rusted galvanised cap needs a stainless replacement, and where a HeatShield ceramic resurfacing can restore a flue without the cost of a full liner replacement.
Common Chimney Sweep Problems We See in Pacific Palisades Homes
Pacific Palisades chimneys sit in the coastal salt-air band just above Pacific Coast Highway, and that location shapes every problem on this list. Galvanised caps, spark arrestors and flashing rust through years before the masonry itself shows wear. A stainless cap and stainless arrestor screen are the standard upgrade here, not a luxury. That’s the single biggest difference between a Pacific Palisades chimney and one in the Valley.
- Rusted galvanised caps and screens. Salt air pits and eats galvanised components first. Then eucalyptus and oak litter pack the screen solid, killing draft and letting first-degree creosote build unnoticed through seasons of light burning.
- Cracked clay-tile liners in older hillside homes. The mid-century and 1960s-70s contemporary houses here often have original clay flues. The liner can crack and spall while the fireplace sees only occasional use, so the damage hides until a Level 2 inspection finds it.
- Clogged arrestor screens on split-level homes. Fireplaces tucked into tight masonry chases often go years without screen clearing. The ember screen fails before the flue ever needs a heavy scrape, which is exactly the wrong order of priorities for a canyon-side house.
- Deferred sweeps and dry flues. The mild coastal climate means no freeze damage, but the dry Santa Ana wind season turns a neglected flue into a real fire concern. Creosote that built slowly over seasons is still fuel when the wind picks up.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Pacific Palisades, CA
Here’s what things typically run in Pacific Palisades. An annual sweep with a Level 1 inspection usually comes in around $180 – $340. A Level 2 inspection, which includes the camera run, is generally $250 – $450. Creosote removal beyond a routine sweep, or a heavy soot and screen-clearing job, tends toward $300 – $600 depending on the deposit. If we find a rusted cap that needs a stainless replacement, that’s a separate line at roughly $250 – $500 fitted. These are typical estimates, not fixed prices. The written estimate you get before we book sets the final cost, and there’s no charge for the estimate itself. If the work can safely wait a season, we’ll tell you that too.
We Also Serve Cities Near Pacific Palisades
If you’re just outside Pacific Palisades, we work the neighboring areas as well: Santa Monica, Brentwood, Westwood and Venice. The coastal conditions are similar, and the same salt-air and ember-screen checks apply. Our full chimney sweep service covers the whole lifecycle, from annual sweep to full chimney repair. And if you’re closer to our home base, you’ll find more about Pacific Palisades coverage right here.
Serving Pacific Palisades, CA – Our Local Coverage Area
We serve Pacific Palisades and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Pacific Palisades
Because your chimney sits in the coastal salt-air band just above Pacific Coast Highway, and salt accelerates corrosion on galvanised metal. Valley chimneys are inland and dry, so their caps last longer. Here, galvanised caps and spark arrestor screens pit and rust through years before the masonry shows wear, which is why we fit stainless caps and stainless arrestor screens as the standard upgrade. Call (833) 725-4278 for a free estimate.
Once a year is still the right interval for most Pacific Palisades canyon homes, even with light decorative burning. The mild coastal climate means creosote builds slowly, and that’s exactly why sweeps get deferred until a flue is packed with first-degree deposits nobody noticed. An annual sweep with a Level 1 inspection catches it early. Call (833) 725-4278 to book one.
It’s both, but it’s a fire-safety issue first. A packed ember screen chokes the draft and is the actual WUI fire-safety component on a canyon-side chimney. Eucalyptus and oak litter fill it faster than most homeowners expect. Clearing the screen is part of a proper sweep, and we check its condition while we’re there. Call (833) 725-4278 for an exact quote; estimates are free.
A Level 1 is a visual check of accessible parts, while a Level 2 adds a camera run through the flue to see the liner interior. For the original clay-tile flues in 1960s-70s hillside homes, we recommend a Level 2, because the liner can crack while the fireplace is used lightly. You’ll see the footage yourself. Call (833) 725-4278 for a free estimate.
No, a brush alone won’t clear glazed, tar-like creosote, which is why we inspect before we sweep. Heavy glazed deposits need scrapers and a proper staged removal, and sometimes a liner assessment follows. We’ll show you the evidence and explain your options plainly. Call (833) 725-4278 for an exact quote; estimates are free.
What Happens When You Call
Here’s a typical job on a canyon-side home. The first sign is usually a fireplace that smokes back into the room, or a cap screen packed solid with eucalyptus litter and ash. That chokes the draft and lets first-degree creosote build unnoticed through seasons of light burning. A qualified sweep pulls the cap and arrestor, brushes the flue liner and smoke chamber, clears the ember screen, and runs a Level 1 or Level 2 inspection on the firebox, damper and chimney crown. Then any rusted galvanised components get flagged for stainless replacement before the next Santa Ana wind event. That’s the whole point of doing this in Pacific Palisades: catching the salt-air corrosion and the clogged screen before either one turns into a chimney fire risk.
From annual sweep to full chimney repair, it’s one specialist and complete care. We don’t recommend liner or masonry work unless the camera evidence supports it, and you’ll see that evidence for yourself. When work can safely wait, we say so.
Call (833) 725-4278 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Written by the team at Chimney Sweep Venice.