Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Venice?
A chimney liner replacement in Venice typically runs $2,400 to $6,200, and a partial chimney rebuild usually falls between $3,800 and $12,000 depending on how far the damage runs and what the masonry looks like once we open it up. A HeatShield ceramic resurfacing, which restores a flue without a full reline, is often in the $1,600 to $3,200 range. Those ranges cover most homes here, but the written estimate is what sets your final price, and we give it free before any work begins.
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. If you’ve had a repair recommendation you don’t fully understand, that’s exactly the conversation we’re built for. Call (833) 725-4278 and we’ll walk you through it in plain terms.
Key Takeaways
- A full stainless liner runs roughly $2,400 to $6,200; a partial rebuild $3,800 to $12,000.
- HeatShield ceramic resurfacing can restore a flue for less than a full reline in some cases.
- What drives cost most in Venice is flue height, access to the roofline, and how much of the existing masonry has to come down.
- Free estimates, upfront pricing, and technicians with up to 13 years of experience.
- Cap and crown work is preventive: fixing water intrusion early is far cheaper than repairing the damage later.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items break down for a typical chimney liner or rebuild job in Venice. These are estimates for planning, not quotes; the exact scope of your chimney comes from an inspection.
| Line item | Typical price range | What it covers |
|---|---|---|
| Standalone chimney inspection | $150 – $350 | Visual and camera assessment of flue condition, no repair required |
| HeatShield ceramic flue resurfacing | $1,600 – $3,200 | Restores a cracked or pitted flue without full liner replacement |
| Stainless flexible liner (DuraFlex) | $2,400 – $6,200 | Full reline of an aging or damaged flue, sized to the appliance |
| Liner for a gas fireplace or insert | $1,900 – $4,400 | Smaller-diameter liner, often shorter run |
| Crown rebuild | $900 – $2,400 | New concrete crown, the cap on top of the chimney that sheds water |
| Chimney cap installation | $300 – $800 | Stainless or copper cap to keep out water, debris, and animals |
| Partial chimney rebuild (above roofline) | $3,800 – $12,000 | Removing and rebuilding damaged brick or block from the roofline up |
| Full chimney rebuild | $9,000 – $22,000 | Complete teardown and rebuild, typically when the structure is unsound |
| Firebox repair | $700 – $2,600 | Rebuilding or resurfacing the firebox and smoke chamber |
The spread within each range comes down to a few things: how high the chimney runs, whether the roofline gives us room to work safely, how much of the existing masonry is salvageable, and what the flue serves (a wood-burning fireplace needs a different liner than a gas insert). When we open up a chimney, we sometimes find more damage than the camera showed – that’s normal, and we’ll always explain what we found and show you the difference before you’re asked to approve anything more. Some jobs land near the low end of a range, some near the high end. The written estimate is the number that matters.
What Affects Chimney Liner & Rebuild Pricing in Venice
Two chimneys of the same height can cost very different amounts to reline or rebuild. Here’s what moves the price in Venice specifically.
- Roofline access and pitch. Many Venice homes have low-pitch or flat roofs with varied rooflines, and how easy it is to set up safely at the chimney affects labor more than anything else. A chimney that’s simple to reach and work around costs less to service than one that requires extra staging and fall protection.
- Flue height and diameter. A tall flue needs more liner material and more labor. A wide flue that served an old open fireplace needs a larger or insulated liner than a narrow one serving a modern insert.
- How much masonry has to come down. A partial rebuild above the roofline is common when the top courses of brick are spalling or the crown has failed. The lower the damage extends, the more the job climbs toward the full-rebuild end of the range.
- Whether resurfacing will do the job. If the flue is cracked or pitted but structurally sound, HeatShield ceramic resurfacing can restore it for a fraction of a full reline. It’s a judgment call that comes from the inspection, and it’s a repair pathway worth asking about specifically.
- Water damage from a failing crown or missing cap. A cracked crown or missing cap lets water into the masonry, and that’s often what turns a small repair into a rebuild. Caps and crowns aren’t optional extras – they’re how you protect everything below them.
- Appliance type. A wood-burning fireplace, a gas insert, and a freestanding stove each call for different liner sizing and venting. That changes material cost and sometimes the labor.
How to Save on Chimney Liner & Rebuild
The single biggest saver on a liner or rebuild is catching the problem early. Here’s what actually lowers the bill.
- Get an inspection first, and get it as its own service. A chimney inspection is the first step, not a sales pitch. We offer it standalone, with no repair work required, so you get a clear picture of your chimney before you commit to anything. Finding a cracked flue before water gets behind the masonry can mean resurfacing instead of a full reline.
- Ask whether resurfacing will do. Ceramic resurfacing with HeatShield can restore your flue without the cost of a full liner replacement in the right conditions. Not every chimney qualifies, but it’s worth asking the question directly.
- Fix the crown and cap before they cause a rebuild. A crown or cap repair now is a fraction of what a rebuild costs later. If your crown is cracked or you have no cap, address it.
- Bundle cap and crown with liner work if both are needed. If a liner or rebuild is already in progress, adding cap and crown work at the same time is usually more efficient than a separate visit. These are handled by one specialist company, so there’s no coordinating a second contractor.
- Get a written estimate with the scope spelled out. A written estimate that itemizes materials and labor lets you compare quotes honestly. We give ours free; call (833) 725-4278.
We’re a dedicated chimney specialty company, not a general contractor who sweeps chimneys on the side. Every price we quote reflects real material and labor costs for the work, and we use industry-grade product lines – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because they’re what the trade uses, not what’s on the shelf at the hardware store.
FAQs – Chimney Liner & Rebuild Cost
What’s the average cost to reline a chimney in Venice?
Most chimney liner replacements in Venice fall between $2,400 and $6,200. That range covers a full stainless DuraFlex liner sized to your appliance. Gas inserts and shorter runs often land at the lower end; tall flues or flues needing extra prep land higher. Call (833) 725-4278 for an exact quote – estimates are free.
Is it cheaper to resurface the flue or replace the liner?
Resurfacing with HeatShield is usually cheaper, typically $1,600 to $3,200 versus $2,400 to $6,200 for a full reline. It works on flues that are cracked or pitted but still structurally sound. If the flue itself is failing, a full reline is the correct fix. An inspection tells you which applies. Call (833) 725-4278 to book one.
How much does a partial chimney rebuild cost in Venice?
A partial rebuild above the roofline typically runs $3,800 to $12,000, and a full rebuild $9,000 to $22,000. The difference comes down to how far the damage runs and how much masonry has to come down. We’ll show you what we found before you approve anything. Call (833) 725-4278 for a free estimate.
Can I fix a cracked chimney crown without a full rebuild?
Yes, in most cases. A crown rebuild runs roughly $900 to $2,400, and a new cap $300 to $800. Both are preventive: fixing water intrusion early is how you avoid a partial rebuild later. If you’re not sure whether yours needs work, an inspection will tell you. Call (833) 725-4278.
How much does a chimney inspection cost in Venice?
A standalone inspection is typically $150 to $350. It’s the first step, not a sales pitch, and we offer it without any requirement to have repairs done. It’s the cheapest way to know exactly what your chimney needs before you spend on a liner or rebuild. Call (833) 725-4278.
Talk to a Chimney Specialist About the Real Number
A range on a page is a starting point. The number that matters is the one for your chimney, and that comes from an inspection and a written estimate – both free. From annual sweep to full chimney repair, we handle the sweep, inspection, cap and crown, fireplace repair, and chimney repair as one specialist company, so you’re not coordinating multiple contractors. You can read more on our chimney liner & rebuild page, or get the big picture on Chimney Sweep Venice.
Call (833) 725-4278. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll tell you what your chimney needs and what it costs, in plain terms.
Pricing reflects the Venice market as of 2026. Chimney Sweep Venice offers free estimates – call (833) 725-4278.
Written by the team at Chimney Sweep Venice.
What Our Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Carlos Reyes"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Neil Ackerman"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Lucia Garcia