Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Westwood
Chimney cap and crown work in Westwood usually starts with a wet stain on a ceiling or a rusted chase cover, not a scheduled remodel. We handle the cap-and-crown side of chimney care for condo owners, apartment residents, HOAs, and the pre-war single-family homes tucked into the streets north of Wilshire. Our technicians have up to 13 years of experience, and we work the mid-rise and high-rise buildings around the Wilshire corridor and UCLA often enough to know how access and approvals actually go. Call (833) 725-4278 and we’ll set up a free estimate.
Why Westwood Homeowners Call Chimney Sweep Venice for Chimney Cap & Crown
Westwood is dense, vertical, and full of shared chimneys. A cap or crown here is rarely one person’s call, so the first thing we do is figure out who else the stack serves and how the building wants changes handled. That means reading the flues, talking to the management company, and spec’ing a cap that covers every flue on the stack instead of just the one we were called about.
We’re a dedicated chimney specialist, not a general contractor who sweeps on the side. We use professional-trade lines like Gelco, Olympia Chimney, and Copperfield because those are built for the job, not the hardware-store shelf. From annual sweep to full chimney repair, one specialist handles the whole lifecycle, so you’re not juggling three contractors for a cap, a crown, and a flue check.
Inspection is also a standalone service. If you want to know whether the crown is failing before you commit to anything, we’ll inspect and report without pushing repair work. Our technicians have up to 13 years of experience, and the local pro we connect you with is licensed and insured as their state requires. That matters when an HOA wants documentation before work gets approved.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Westwood
Caps and crowns aren’t optional extras. They’re how you protect everything below them in a building full of shared flues. Here’s what we handle across Westwood.
Multi-Flue Cap
Most Wilshire-corridor and UCLA-adjacent buildings have a single stack serving several units. A multi-flue cap covers every flue on that stack as one unit, so one owner’s repair doesn’t leave the neighbor’s flue open to rain and animals. We spec it to the actual stack dimensions, which is where a lot of these jobs go wrong when someone buys a stock cap sized for one flue.

Crown Repair
On 1970s mid-rise chases, we see spalling crown mortar that’s let water creep into a common-wall flue. Crown repair rebuilds the top with the right slope so water sheds away from the flue openings instead of pooling behind them. On a shared stack, this is a building-wide fix, and we’ll walk the management company through what we found and why it needs doing.

Custom Cap
Factory-built and gas-log fireplaces in Westwood units often have terminations that a standard masonry cap won’t fit. A custom cap is built to the exact opening, the exact flue count, and the look the building wants since it’s visible from the street. That last part is usually where HOA sign-off comes in.

Cap Replacement
A rusted chase cover on a condo roof is a water-entry problem, not a cosmetic one. We replace caps and flashing that have corroded or been sized wrong for factory-built and gas-log units that sat unused for years. If you’re unsure whether the existing cap is even the right type, we’ll check before recommending replacement.
Trusted Brands We Service in Westwood
We work with a focused group of professional-trade chimney brands: Gelco, Olympia Chimney, Famco, and Copperfield among them, plus DuraFlex liner systems when a flue needs relining. These are the names the trade actually uses, and they’re what we specify for cap and crown work in Westwood because they hold up to the local sun and dry wind. We don’t claim to stock parts locally, but we do keep the sourcing simple and turn cap and crown work around fast once the building signs off.
Common Chimney Cap & Crown Problems We See in Westwood Homes
- A single-flue cap on a shared stack. Someone covers their own flue and leaves the neighboring units’ flues exposed. That creates draft and water-entry complaints across the whole building, and the fix is a multi-flue or custom cap that serves every flue on the stack.
- Spalling crown mortar on 1970s mid-rise chases. The crown cracks and lets winter rain and Santa Ana-driven debris into a common-wall flue. Left alone, that water works its way into the chase and shows up as staining inside individual units.
- HOA friction over street-visible changes. A cap or crown change that shows from the street often needs sign-off first. Owners who skip that step end up in a dispute after the fact, so we plan the approval into the job.
- Single-family parts on factory-built units. Caps and flashing sized for a masonry chimney get applied to a factory-built or gas-log unit that sat unused for years and was never inspected. The fit is wrong and the flue stays unprotected.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Westwood, CA
What a cap or crown job costs in Westwood comes down to how many flues are on the stack, whether the cap is stock or custom, and how much crown rebuilding is needed. These are typical estimates, and the written estimate you get after inspection sets the final price:
- Single-flue cap installation or replacement: roughly $275 to $550
- Multi-flue or custom cap sized to a shared stack: roughly $550 to $1,400
- Crown repair on a mid-rise or masonry chimney: roughly $450 to $1,100
- Crown coating to seal a cracking but sound crown: roughly $300 to $650
Building-wide jobs and anything requiring a custom fabrication run higher. The estimate is free, and if the crown can safely wait a season, we’ll tell you that too. Call (833) 725-4278 for an exact quote.
We Also Serve Cities Near Westwood
Westwood keeps us busy, and we also take chimney cap and crown work in Brentwood, Beverly Hills, Santa Monica, and Mar Vista. If you’re in one of those neighborhoods and dealing with a shared stack or a rusted chase cover, the same process applies. Learn more about our chimney cap & crown work or explore all we do around Westwood.
Serving Westwood, CA – Our Local Coverage Area
We serve Westwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Westwood
You can, but a single-flue cap on a shared stack usually causes more problems than it solves. Covering only your flue leaves the neighboring units’ flues open, which creates draft issues and water entry the building has to deal with later. The better route is a multi-flue or custom cap spec’d for the whole stack, coordinated with the other owner or the management company.
Often yes, especially when the change is visible from the street. Requirements vary by building, so we check with the management company before work begins and give them the inspection findings so they can approve it with real information. Getting sign-off first avoids a dispute after the cap is already on the roof.
Yes. A gas-log conversion doesn’t protect the flue from water, animals, or a failing crown, and a fireplace that sat unused for years should be inspected before you light it again. South Coast Air Quality Management District wood-burning rules make gas-log conversions common in Westwood, which means a lot of these fireplaces go uninspected for a long time.
Crown repair rebuilds a crown that’s cracking or spalling, restoring the slope so water sheds away from the flues. Crown coating seals a crown that’s still structurally sound but showing surface cracking. On a mid-rise chase, the inspection tells us which one you need, and we don’t recommend rebuilding a crown that only needs sealing.
Because fireplaces here get limited seasonal use, creosote builds slowly, but the dry Santa Ana winds and occasional winter rain put steady stress on caps, flashing, and pest entry. A failed cap lets water and debris into the flue, which is a bigger risk in Westwood than heavy soot. Call (833) 725-4278 for an inspection and a free estimate.
Get a Free Chimney Cap & Crown Estimate in Westwood
Whether you’re in a condo tower along Wilshire, a mid-rise near UCLA, or one of the older single-family homes north of Wilshire, a cap or crown problem on a shared chimney is worth catching early. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait. Call (833) 725-4278 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Venice.