Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Venice?
Chimney cleaning in Venice typically costs $150 to $290 for a standard wood-burning fireplace, and that usually includes a Level 1 visual inspection. If your flue needs a camera inspection or you have a gas appliance that needs specific venting checked, expect closer to $150 to $450 depending on what we find. Most Venice homes fall in that range, and the written estimate we give you before any work starts is the final word on price.
We’re a chimney specialty company, not a general handyman who sweeps on the side. That matters for pricing because we know what we’re looking at: a 1920s bungalow off Abbot Kinney with an original clay flue is a different job from a newer build near the Venice Canals with a factory-built insert. Different chimney, different time, different price. Call (833) 725-4278 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cleaning Cost Breakdown (2026)
Here’s how cleaning and inspection pricing shakes out in the Venice market. These are typical ranges, not a fixed menu; the written estimate sets the final number.
| Service | Typical Venice Range | What’s Usually Included |
|---|---|---|
| Standard chimney sweep (wood-burning) | $150 – $290 | Creosote removal, soot brush-down, firebox and damper cleaning, Level 1 visual check |
| Gas fireplace vent cleaning | $120 – $240 | Vent and termination check, debris removal, airflow confirmation |
| Level 2 camera inspection | $200 – $450 | Video scan of the flue, joint and liner assessment, written findings |
| Sweep plus Level 2 inspection (common pairing) | $300 – $600 | Full clean followed by a camera inspection of the cleaned flue |
| Heavy creosote removal (glazed, stage 3) | $350 – $700 | Extra time, specialized removal for hard glazed deposits |
| Chimney cap installed | $175 – $550 | Cap sized to your flue, fitted and sealed |
| Crown repair or rebuild | $300 – $1,200 | Depends on whether it’s a resurface or a full crown rebuild |
| HeatShield ceramic flue resurfacing | $1,100 – $3,200 | Ceramic resurfacing to restore a deteriorated flue |
| DuraFlex liner replacement | $2,000 – $4,800 | New flexible liner, insulation, and termination |
What drives the price up or down? Three things, mostly. First, how much creosote is in the flue. A light yearly coating brushes out fast; glazed, tar-like stage 3 creosote takes real time and specialized handling. Second, access. A chimney on a steep Venice roof or one tucked behind a tight lot line is slower to set up safely than one with clear access. Third, whether you want inspection included. A sweep alone is cheaper than a sweep plus a camera inspection, but most homeowners are better off knowing what’s inside the flue before they skip that step.
Why Venice Pricing Looks the Way It Does
Venice has a real mix of housing stock. There are original bungalows and cottages with older masonry chimneys, mid-century homes that were retrofitted with inserts, and newer builds with factory-built fireplace systems. Each one takes a different approach. An older clay flue may have cracked joints that only a camera inspection will reveal. A factory-built unit has specific venting requirements that have to be matched to the product. That’s why we carry six recognized chimney-industry product lines – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – rather than sourcing whatever’s on the shelf. We use those brands because they’re what the trade uses, and they fit the systems we find in Venice homes.
What Affects Chimney Cleaning Pricing in Venice
- Chimney type and age. Masonry chimneys with clay tile flues generally take longer to clean than a factory-built metal system, and older Venice homes often have clay flues that need a careful inspection before anyone brushes them.
- Creosote level. Stage 1 creosote is a light soot coating and cleans quickly. Stage 3 is glazed and hardened, needs more time and specialized removal, and is the single biggest reason a sweep costs more than the standard range.
- Whether inspection is included. A standalone inspection is available as its own service – a real safety assessment with no repair work required. When you pair it with a sweep, the combined price is lower than booking each separately on different visits.
- Roof access and height. A one-story cottage near Oakwood is a faster setup than a taller chimney with a steep pitch. Access affects labor time more than anything else.
- Blockages and nesting. Birds, squirrels, and debris in the flue add removal time. A cap prevents this going forward, which is why we treat cap and crown work as its own dedicated service rather than an add-on.
- Gas versus wood. Gas fireplaces don’t produce creosote, but their venting still needs checking. Gas vent cleaning is usually toward the lower end of the range.
One more factor worth naming: what a previous sweep left behind. If a chimney hasn’t been cleaned in many seasons, or was cleaned without a proper inspection, there may be undiscovered issues. Our technicians have up to 13 years of experience, and part of that experience is knowing when to stop brushing and start looking. A chimney inspection is the first step, not a sales pitch.
Repair Costs You Might Face After Cleaning
A sweep sometimes turns up a problem. Here’s what those repairs typically run in Venice, so nothing surprises you.
- Chimney cap: $175 to $550. Caps stop water, debris, and animals from getting in. They’re not optional extras – they’re how you protect everything below them.
- Crown repair or rebuild: $300 to $1,200. The crown is the concrete top that sheds water away from the chimney. A cracked crown lets water into the masonry, so this one is worth fixing early.
- HeatShield ceramic resurfacing: $1,100 to $3,200. This is our cost-conscious repair pathway: ceramic resurfacing with HeatShield can restore your flue without the cost of a full liner replacement. We’re HeatShield-qualified for ceramic flue resurfacing, and not every chimney company offers or carries it.
- DuraFlex liner replacement: $2,000 to $4,800. When the flue is too far gone to resurface, a new flexible liner is the fix. We use DuraFlex liner systems, an industry-standard solution for relining aging or damaged flues.
- Fireplace repair: Varies by scope – damper, firebox, and refractory issues are priced per job after inspection.
From annual sweep to full chimney repair – one specialist, complete care. You don’t have to coordinate a sweeper, an inspector, and a mason. We handle the full lifecycle of chimney work, and we’ll tell you plainly when a repair can wait and when it can’t.
Is It Cheaper to Repair or Replace My Chimney Liner?
Repair is almost always cheaper when the damage is limited to the flue surface: HeatShield resurfacing typically runs $1,100 to $3,200 versus $2,000 to $4,800 for a full DuraFlex liner replacement. If the existing liner is structurally sound but worn on the inside, resurfacing can restore it. If the liner is cracked through, disconnected at joints, or the wrong size for the appliance, replacement is the honest answer. A Level 2 camera inspection tells us which situation you’re in.
This is why we like having both options in the shop. A company that only installs liners will sell you a liner. We’ll give you the cheaper path when it’s safe and only recommend replacement when the flue truly needs it. Call (833) 725-4278 to book an inspection – estimates are free.
How to Save on Chimney Cleaning
The best savings come from not waiting. A yearly sweep keeps creosote from building to the glazed stage, and a $150 to $290 cleaning is far cheaper than $350 to $700 for heavy removal or a liner job later. A few practical moves:
- Book the sweep and inspection together. Combining them on one visit costs less than scheduling them separately.
- Get a cap put on. A $175 to $550 cap keeps birds, rain, and debris out, which means fewer blockages and less removal time at your next cleaning.
- Burn seasoned wood. Dry, well-seasoned wood produces less creosote than green or damp wood, and less creosote means a faster, cheaper sweep.
- Don’t skip a year because the fireplace “seems fine.” Creosote builds quietly. Catching it early is the whole game.
- Ask for a written estimate before work starts. Ours is free and sets the final price, so there are no surprises when the job’s done. Call (833) 725-4278.
Why a Specialist Handles the Sweep and the Repairs
Plenty of general home-services companies will brush a chimney. Fewer will read a camera inspection, spot a failing crown, and know which HeatShield or DuraFlex component matches your flue. We focus on chimneys only: sweeping, inspection, cap and crown, fireplace repair, and chimney repair. That focus shows up in price, because we diagnose accurately the first time instead of guessing and coming back.
We stock and work with six recognized lines – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – and we’ve built our service around what those products are engineered to do. If you want to understand the full range of what we handle, start with chimney sweep in Venice, then we can talk about where your chimney fits.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Venice?
Standard chimney cleaning in Venice costs about $150 to $290 for a wood-burning fireplace, including a Level 1 visual inspection. Gas vent cleaning runs $120 to $240, and a Level 2 camera inspection is $200 to $450. Call (833) 725-4278 for an exact quote – estimates are free.
Can I get my chimney cleaned and inspected the same day?
Yes, we often pair a sweep and a Level 2 camera inspection on one visit, which typically costs $300 to $600 combined – less than booking them separately. Call (833) 725-4278 to check availability. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why is my chimney cleaning quote higher than the standard range?
Quotes climb above $290 when the flue has heavy or glazed creosote (removal runs $350 to $700), or when roof access and setup take extra time. A camera inspection may also turn up a cracked flue that needs attention. Call (833) 725-4278 and we’ll walk you through what’s driving the number.
Do I need a chimney inspection every year?
Annual inspection is the safest rule, and a standalone inspection starts around $200 in Venice. Most homeowners pair it with the yearly sweep, which keeps the total lower. An inspection is a professional safety assessment on its own – no repair work required. Call (833) 725-4278 to schedule one.
Is it cheaper to repair my flue or replace the liner?
Repair is usually cheaper: HeatShield ceramic resurfacing runs $1,100 to $3,200 versus $2,000 to $4,800 for a full DuraFlex liner replacement. Resurfacing restores a worn but structurally sound flue; replacement is the right call when the liner is cracked or failing. Call (833) 725-4278 for a free estimate.
Get Your Free Estimate
Chimney cleaning in Venice is a small cost that protects a much bigger one. Whether you’re due for an annual sweep, want a standalone inspection, or got a repair recommendation you’d like explained in plain terms, we’ll give you a straight answer and a written estimate before any work starts. Call (833) 725-4278. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Venice market as of 2026. Chimney Sweep Venice offers free estimates – call (833) 725-4278.
Written by the team at Chimney Sweep Venice.
What Our Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Carlos Reyes"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Neil Ackerman"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Lucia Garcia